| |
| End Suction Single Stage Monoblocs |
|
Range
• Capacity 47 to 2 LPS
• Head up to 6 to 76 meters
• Power rating 2.2 kW to 22 kW (3 to 30 HP)
• Nominal Speed 2900 rpm
Features
• Withstand wide voltage fluctuation 300 to 440 volts
• High suction lift up to 7.5 m
• Top flat efficiency curve
• Totally enclosed fan cooled motor
• Can be offered with IP-44 and IP-55 protection
• Can be offered with Class ‘B’ / ‘F’ insulation |
| TOP |
| |
| Vacuum Pumps (Type DV) |
|
Range
• Vacuum up to 650 mm of Mercury
• Air flow rate up to 162 m3 /hr
• Power rating 3.7 kW to 7.5 kW (5.0 hp to 10.0 hp)
Features
• Sturdy casing, provided with foot, suction and delivery nozzles
• Grease lubricated deep groove ball bearings
• Easy maintenance and spares availability |
| TOP |
| |
| Self Priming Pumps |
|
Range
• Suitable for borewells diameter 150 mm
• Capacity up to 72 m3 /hr
• Head up to 200 metres
• Power rating 2.2 kW to 15 kW (3 hp to 5 hp)
Features
• Multistage
• High speed
• Radial flow / mixed flow
• Low power consumption per stage
• Nitrile rubber bushes suitable for voltage fluctuation 200 V to 440 V |
| TOP |
| |
| Submersible Pumps (Type- Champion) |
|
Range
• Delivery size up to 65 mm
• Capacity up to 53 m3 /hr
• Head range up to 136 metres
• Power rating up to 19.0 kW (26 hp)
Features
• Designed to run direct/through pulley with an engine/motor
• Minimum variation in efficiency
• Dynamically balanced rotating parts
• Grease lubricated deep groove ball bearings |
| TOP |
| |
| Multistage Pumps ( Type- SR) |
|
Range
• Delivery size up to 65 mm
• Capacity up to 53 m3 /hr
• Head range up to 136 metres
• Power rating up to 19.0 kW (26 hp)
Features
• Designed to run direct/through pulley with an engine/motor
• Minimum variation in efficiency
• Dynamically balanced rotating parts
• Grease lubricated deep groove ball bearings |
| TOP |
| |
| End Suction Pumps (Type-DB/DBHS/DBM) |
|
Range
• Delivery size up to 150 mm
• Capacity up to 550 m³ /hr
• Head up to 100 metres
• Temperature (-) 10 degree C to 100 degree C
Features
• Conforming to DIN 24255
• Back pull-out design
• Gland packed / Mechanical seal
• 50HZ / 60 HZ availability
repsswiss.com swiss replica watches
|
| TOP |
| |
| Submersible Sewage Pumps ( Type-NS) |
|
Range
• Delivery size up to 200 mm
• Capacity up to 750 m³ /hr
• Head up to 48 metres
• Temperature (-) 10 degree C to 90 degree C
Features
• Non-clog two vane or single vane enclosed impeller
• Permissible solid size up to 85 mm
• Gland packed / Mechanical seal
• 50 HZ / 60 HZ availability |
| TOP |
| |
| In line Vertical Multistage Pumps (Type-IL) |
|
Range
• Delivery size up to 100 mm
• Capacity up to 75 m³ /hr
• Head up to 220 metres
• Temperature (-) 15 degree C to 120 degree C
Features
• Pressed stainless steel components
• Very high efficiency and low NPSH
• All wetted parts in SS304 or SS316
• Mechanical Seal 50Hz /60Hz availability |
| TOP |
| |
| Horizontal Axially Split Casing Single Stage Pumps (Type-UP/UPL/UPH/UP(T)) |
|
Range
• Delivery size up to 1100 mm
• Capacity up to 20,000 m³ /hr
• Head up to 160 metres
• Temperature (-) 10 degree C to 90 degree C
Features
• Gland packed / Mechanical seal
• 50HZ / 60 HZ availability |
| TOP |
| |
| Canned Motor Pumps (Type KCS) |
|
Range
• Delivery size up to 250 mm
• Capacity up to 1000 m³ /hr
• Head up to 135 metres
• Temperature (-) 40 degree C to 250 degree C
Features
• Non-seal pump
• Integral construction of pump and motor
• Horizontal / Vertical execution |
| TOP |
| |
| Vertical Turbine Pumps |
|
Range
• Delivery size up to 2200 mm
• Capacity up to 40,000 m³ /hr
• Head up to 200 metres
Features
• High efficiency impellers and bowls
• Vibration-free performance
• Low submergence
• No priming required
• Dry pit/Wet pit arrangement available
• Direct drive/Right angle gear drive
• Impeller pull-out/Non-pull-out
• Bowl pull-out/Non-pull-out
• Gland packed / Mechanical seal
• 50Hz / 60Hz availability |
| TOP |
| |
| Globe Valves (Cast Steel) |
|
Range
• Conforming to BS 1873
• Class 150# sizes 2" to 14"
• Class 300# sizes 2" to 8"
• Class 600# sizes 2" to 6”
Features
• Rigid and Sturdy Design
• Low pressure loss
• Long service life |
| TOP |
